Standards

EN 361

The EN 361 standard specifies the requirements, test methods, instructions for use, marking and packaging for full body harnesses.
The working harness is a category III personal protective equipment and consists of an element to hold the operator’s body by means of arrest and/or suspended support, so as to guarantee his safety in case of a falling hazard. Full body harnesses consisting of shoulder straps and sit straps must be used in all working activities where falls of over 5 m are possible.
Some types of harnesses are integrated with a waist positioning belt, also called combined harnesses. These can be connected to solid anchors, possibly placed higher than the operator. They can have rear attachment (dorsal) or front attachment (sternal). The shoulder straps must be suitable for the movements of the operator and, where required, have adequately sized and padded sit straps. In compliance with the positioning standard EN 358.

EN 361

Products for this standard

SOKOI 11 HARNESS

SOKOI 13 HARNESS

SOKOI 14 HARNESS

STRATOS 2 SAFETY HARNESS

STRATOS 3 SAFETY HARNESS

CLIMBING PROTECTION KIT

ROOFING FALL PROTECTION KIT

CONSTRUCTION & GENERAL MAINTENANCE KIT

MOBILE ANCHORING DEVICE KIT

NEWTON EASYFIT SAFETY HARNESS SZ XXS-S

NEWTON EASYFIT SAFETY HARNESS SZ S-L

NEWTON EASYFIT SAFETY HARNESS SZ L-XXL

AVAO BOD FAST HARNESS SZ XXS-S

AVAO BOD FAST HARNESS SZ S-L

AVAO BOD FAST HARNESS SZ L-XXL